  the mould ready for the molten lead
 Sorry Doreen but the job just has to be done
 the cast now fettled to fit the nose
  Lead pushed into place
 end of tray cut off and a curved slot cut in the lead
for the tray to slide into
 nose weight now glued into fuz
 The vector wing fit perfectly in a Aldi fishing bag
 New flap horn had to be made when the built in one broke
 drilled out ready for the repair
 the broken horn
 extra strenght balsa formers fitted to from a box
 digital servos from Hobbyking £13.50 each used in the wing
 |
 view showing the back ballast tube glued in with
epoxy and carbon toes
  Test fitting the tube and tray
 Afew carbon toes over the tube end stop
 marking up the tube to find the center and C OF G
 Distance the tube sticks out
 Wrap the fuz in cling film to prevent glue sticking
 All the gear in, testing for fit
 this shows the ballast securing nut epoxyed to the tube
 When the build is complete this makes a realy strong glider all we need to do now is to fly them.
The Vector 3 is for sale by Sloperacer http://www.sloperacer.co.uk/
    Daves brill idea to see what you are doing when
glueing the ballast formers in the fuz  Dave feeling light headed
|
|
|
|
Model Builds --- Vector 3 Build |
